Info

Directions for Use: Clean the entire surface to be coated. After cleaned and dry, spray LOOK N GOOD over the area, working ½ sq. metre (5 sq. ft.) or less at a time. Using the microfibre cloth, rub and polish until all the liquid has dissipated. Continue until finished. If possible, wait 15 minutes before exposing to water.

Hint: for toilet bowls, after cleaning turn the tap off behind the tank and flush again. Then remove as much of the remaining water with a sponge or bailer.

Durability will lessen over time and reapplication will be required.

All Toilets Are Not Created Equal: A clean flush requires sufficient water flow and adequate coverage of the flow of water.